Ningbo Haishu Kaiau Electronics Co., Ltd.
Main products:pir sensor
Contact Us
  • Contact Person : Mr. Chen Laurence
  • Company Name : Ningbo Haishu Kaiau Electronics Co., Ltd.
  • Tel : 86-574-87246943
  • Fax : 86-574-87246943
  • Address : Zhejiang,Ningbo,Ouchi Industrial Zone,Yinzhou,Ningbo,China
  • Country/Region : China

ceiling sensor switch (KA-S03A)

ceiling sensor switch (KA-S03A)
Product Detailed
1.Ceiling sensor switch 2.Time delay:12sec. to 13min.(adjustable) 3.Detection distance:2-10m(adjustable) 4.High senstitive

KA-S03A ceiling sensor switch specifications:

1) Power source:220V/AC-240V/AC,100V/AC-130V/AC2) Power frequency:50/60Hz3) Rated load:600W(100-130V/AC),1200W(220-240V/AC)4) Detection range:360 degree5) Light control:<20LUX-daylight(adjustable)6) Time delay:10sec±2sec to 12min±1min(adjustable)7) Detection distance:2-10m(adjustable)8) Installation height:2-4m9) Detection speed:0.6-1.5m/s  


1) White box or customized color box

2) Carton size: 50*38.5*36cm

3) Gross weight:15.6KGS

4) Quantity/carton:60pcs

Product introduction:

KA-S03A is a new saving-energy switch, it adopts good sensitivity detector, integrated circuit and SMT. It gathers automatism, convenient safe, saving-energy and practical functions. Three detectors inside compose a wide range detection field, it utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely, possessing the functions of power show and detecting show.

KA-S03A size:


KA-S03A function:

You can manually adjust the Time-delay, Sensitivity and light control (For detail: see 1.knob setting); it is veryeasy to use. Install Sensor at 2.5~3.5m position on the wall (For detail: see 3. installation instruction) andconnect the wire according to the 2. connection figure. Switch on power, after about 1 minute the unit enterstable working state. Here please turn TIME knob to the position close to minimum, and turn LUX to sun fortesting. If it works normally, turn the TIME knob to the minimum” IMPULSE” position( ). When it senses again,the controlled lamp will be turned on and off regularly. If the above tests go through, then select the time, lightcontrol and sensitivity to your need. So its installation is ok.

Installation diagram:

ceiling sensor switch (KA-S03A)

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.